iCoat - Concrete Products

Office: 877-669-1110
Headquarters Direct : (602) 258.1114


I-22 (Natural) and I-30 (Gloss) Color Enhancing Acrylic Sealers
iCOAT’s most popular sealers.  This color locking acrylic sealer is a solvent based sealer best applied on concrete, stamped concrete, exposed aggregate, pavers and many other Masonite surfaces.  It provides excellent wear resistance and carries the best UV protectants in sealers.  With its deep penetration, surfaces are protected from foreign substances such as grease, oil, and moister.
These two sealer are best outdoor, but can be used indoors as well.  Our sealers are very easy to apply.  You can roll it or spray it on and is great for patios, driveways, sidewalks, pool decks and other concrete finishes.
These are breathable sealers.

Polyaspartic QD 12    

This polyaspartic is a solvent based two component 85% solids polyaspartic aliphatic urethane clear coating.  Polyaspartic QD 12  has excellent chemical resistance for hardness, abrasion resistance, UV stability and has an excellent clear gardner color.  However, the outstanding feature of this product is its exceptionally quick tack free time of around 1-2 hours for foot traffic.

This product is recommended for areas where a thin/medium build clear coat is desired over a broadcast system and installation downtime is very limited.   This product is suitable as a thin/medium build coating only and is great for bars, restaurants, warehouses, hospitals, clinics, basements and more.

This is a non-breathable sealer.

Poly-Low Odor Matt/Gloss Sealer
This is a water-based, low VOC (under 100), breathable sealer.  Poly-Low Odor gives you a plastic film-forming protection while adding a Matte (natural) or high gloss (wet look) beauty to concrete, pavers, brick, and other porous stone.  
On hot days Poly-Low Odor maintain its integrity and won’t soften.  When properly applied this product will not yellow, crack, or peel.
This product is great for both indoor and outdoor.  It’s great for indoors because there is very little odor.
This is a breathable sealer.

Urethane 500 Satin/Gloss

Urethane 500 is a two component polyester/aliphatic polyurethane floor sealer that exhibits flexibility and excellent characteristics for weathering, abrasion resistance, chemical resistance, and is UV stable.

This product works great for a sealed topcoat on the iCOAT Metal Illusion Epoxy Floor System.  This is a great indoor sealer. Recommended use would be for bars, restaurants, auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, indoor or outdoor service and chemical exposure areas.

The application is a thin layer up to 3 to 5 mils.  Thick is not good.

These two products are available in 1.5 gallon kits.

This sealer is a non-breathable sealer.

Urethane One

Urethane One is a single component moisture cured polyurethane (HDI based) floor coating/sealer that exhibits superior characteristics for abrasion resistance and chemical resistance.  This product has good UV stability and is a great indoor sealer.

This product is both a residential and commercial grade sealer recommended for bars, restaurants, hospitals, dentist office, showrooms, warehouses, laboratories, cafeterias, and most indoor chemical exposure areas with regard to concrete or cement.

This is a non-breathable sealer.

You are here: iCoat Systems Product showcase Concrete sealers
1519 W Grant St. Phoenix, AZ 85007
Office: 877-669-1110
Headquarters Direct : (602) 258.1114